B101

BNC S/T Plug, Dual Crimp Type (IP68)
for for RG174,188,316;B7805A;URM95 Cable

Applications

Features

BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
Interface according to IEC 169-8, MIL-C-39012 BNC, MIL-STD-348B

Special Notice

• The specification is listed below for information. All dimensions are fully complied with Military requirements.

S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt

Spray test at the moment.

• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,

QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

Electrical

Impedance	50Ω
Frequency Range	0 to 4 GHz
Voltage Rating	≥500 V rms (depending on cable)
Insulator Resistance	≥5 GΩ
Dielectric Withstanding Voltage	1500 V rms
Contact Resistance	Center Contact ≦3 mΩ Outer Contact ≦2.5 mΩ

Mechanical

Mating	Bayonet Coupling
Recommended Mating Torque	0.6 lbs ~ 2.5 lbs
Coupling Nut Retention Force	≥101.2 lbs

Environmental

Material

Note: Other Material/Finish is Available on Request.