B209
Description
BNC Panel Mount Solder Jack, 4-Hole Type
| Applications |
• Computers/LANs
• Instrumentation
• Test and Measurement
• Medical Equipment
• Broadcast (75 ohm)
| Features |
• BNC connectors with a 50 ohm nominal impedance are designed for use in telecommunication, data communication and test and instrumentation equipment. BNC connectors with a 75 ohm nominal impedance are designed for broadcast, video and other applications which require impedance matched performance. Both 50 ohm and 75 ohm BNC connectors are intermateable.
• Interface according to IEC 169-8, MIL-STD-348B
| Special Notice |
• Any questions, please feel free to contact our QA department.
| Electrical |
|
Impedance |
50Ω / 75Ω |
|
Frequency Range |
0 to 4 GHz / 0 to 1 GHz |
|
VSWR |
≤1.3 (straight connector) ≤1.35 (right angle connector) |
|
RF Leakage |
≥55 dB |
|
Dielectric Withstanding Voltage |
1500 V rms |
|
Voltage Rating |
≥500 V rms (depending on cable) |
|
Inner Contact Resistance |
≤1.5 mΩ |
|
Outer Contact Resistance |
≤1 mΩ |
|
Insulation Resistance |
≥5 GΩ |
| Mechanical |
|
Mating |
Bayonet Coupling |
|
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
|
Recommended Mating Torque |
0.6 lbs ~ 2.5 lbs |
|
Coupling Nut Retention Force |
≥101.2 lbs |
|
Cable Retention Force |
≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
| Environmental |
|
Temperature Range |
-65° C to 165° C |
|
Corrosion (Salt Spray) |
MIL-STD-202, Method 101, Cond. B |
|
Vibration |
MIL-STD-202, Method 204, Cond. B |
|
Thermal Shock |
MIL-STD-202, Method 107, Cond. B |
|
Mechanical Shock |
MIL-STD-202, Method 213, Cond. G |
| Material |
|
Parts Name |
Material |
Plating |
|
Body |
Brass |
Nickel |
|
Insulator |
PTFE |
None |
|
Pin |
P. Bronze |
Gold |
Note: Other Material/Finish is Available on Request.
