Product Search

Contact S-Conn (12GHz)

Description

BNC B/H-O Jack, R/M Single Crimp Type, for B1855A, B4855R, UHD-0.6/2.6 Cable (75 Ohm)

Applications

• Serial digital interface (SDI)
• High definition television (HDTV)
• 3G-SDI (Per SMPTE 424M)
• NTSC & PAL video system

Features

• Interface compatible to IEC 60169-8, CECC 22 120, MIL-PRF-39012 BNC
• Quality tested according to US MIL-STD-202
• Frequency range optimum up to 12GHz

Special Notice

• The specification is listed below for information. All dimensions are fully complied with Military requirements.

S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt

Spray test at the moment.

• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,

QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

Electrical

Impedance	75Ω
Frequency Range	0 to 12GHz
Dielectric Withstanding Voltage	1000 V rms
Voltage Rating	500 V rms
Contact Resistance	Center Contact ≤3 mΩ Outer Contact ≤2.5 mΩ
Insulation Resistance	≥5 GΩ

(Remark)
The above electrical specification is tested by simulation software and it’s for the connector only. It could be affected by those which can’t work properly at higher frequency, such as cable, adapter, VNA, etc.

Mechanical

Mating	Bayonet Coupling
Recommended Mating Torque	0.6 lbs ~ 2.5 lbs

Environmental

Temperature Range	-65° C to 165° C
Corrosion (Salt Spray)	MIL-STD-202, Method 101, Cond. C
Vibration	MIL-STD-202, Method 204, Cond. D
Thermal Shock	MIL-STD-202, Method 107, Cond. B
Mechanical	MIL-STD-202, Method 213, Cond. I

Material

Parts Name	Material	Plating
Body	Brass	Nickel
Insulator	PTFE	None
Inner Contact	BeCu	Nickel or Gold
Center Contact	Brass	Nickel or Gold
Ferrule	Brass	Nickel
O-Ring	Si-Rubbe	Black
Lock Washer	Brass	Nickel
Nut	Brass	Nickel

Note: Other Material/Finish is Available on Request.