N205
Applications |
• Antenna
• Base Stations
• Microwave Components (Power Splitters & Combiners, Filters, Diplexors)
• Transmitters
• Broadcast
• Receivers
• Radar
• Test & Measurement
• Instrumentation
• LANs
Features |
• Accommodates a wide range of popular coaxial cables.
• Screw-on coupling mating.
• Available in crimp terminations to provide for low cost installation.
• Interface according to IEC 169-16, CECC 22210, MIL-STD-348B
Special Notice |
• Any questions, please feel free to contact our QA department.
Electrical |
Impedance |
50Ω / 75Ω |
Frequency Range |
0 to 11GHz / 0 to 1.5GHz |
VSWR |
≤1.3 (straight connector) |
RF Leakage |
≥60 dB |
Dielectric Withstanding Voltage |
2500 V rms |
Voltage Rating |
≥1000 V rms (depending on cable) |
Inner Contact Resistance |
≤1 mΩ |
Outer Contact Resistance |
≤1 mΩ |
Insulation Resistance |
≥5 GΩ |
Mechanical |
Mating |
5/8-24 UNEF threaded coupling |
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
Recommanded Mating Torque |
6.0 lbs ~ 10.0 lbs |
Coupling Nut Retention Force |
≥101.3 lbs |
Cable Retention Force |
≥ 12.1 lbs (for RG316) |
Environmental |
Temperature Range |
-55°C to 155°C |
Corrosion (Salt Spray) |
MIL-STD-202, Method 101, Cond. B |
Vibration |
MIL-STD-202, Method 204, Cond. B |
Thermal Shock |
MIL-STD-202, Method 107, Cond. B |
Mechanical Shock |
MIL-STD-202, Method 213, Cond. I |
Material |
Parts Name |
Material |
Plating |
Body |
Brass |
Nickel |
Inner Contact |
Male: Brass |
Gold |
Insulator |
PTFE |
None |
Gasket |
Silicone Rubber |
None |
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.