Product Search

RS211 (Long Thread)

Description

RP SMA S/T Jack, PCB Mount Type

Applications

• Spread Spectrum Wireless Devices

Features

• These connectors may also be used in applications where keying is a necessity. The RP SMAs meet the same high quality requirements as S-Conn’s standard SMAs. They provideexcellent performance DC 18GHz for RP-SMAs.

Special Notice

• The specification is listed below for information. All dimensions are fully complied with Military requirements.

S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt

Spray test at the moment.

• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,

QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

Electrical

Impedance	50Ω
Frequency Range	0 to 18 GHz
VSWR	≤1.2 + .03f (GHz)
RF Leakage	≥60 dB
Dielectric Withstanding Voltage	1000 V rms
Voltage Rating	≥500 V rms (depending on cable)
Inner Contact Resistance	≤3 mΩ
Outer Contact Resistance	≤2.5 mΩ
Insulation Resistance	≥5 GΩ

Mechanical

Mating	1/4-36 UNS Screw-on Coupling
Connector Durability	≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque	7.1 lbs ~ 9.7 lbs
Coupling Nut Retention Force	≥60.7 lbs
Cable Retention Force	≥ 7.3 lbs (for RG178) ≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58)

Environmental

Temperature Range	-65° C to 165° C
Corrosion (Salt Spray)	MIL-STD-202, Method 101, Cond. B
Vibration	MIL-STD-202, Method 204, Cond. D
Thermal Shock	MIL-STD-202, Method 107, Cond. B
Mechanical Shock	MIL-STD-202, Method 213, Cond. I

Material

Parts Name	Material	Plating
Body	Stainless steel Brass	Passivated or Gold Nickel or Gold
Inner Contact	Male: Brass Female: Beryllium Copper Phosphor Bronze	Gold
Insulator	PTFE	None
Gasket	Silicone Rubber	None
Crimp Ferrule	Annealed Copper	Same as Body

Note: Other Material/Finish is Available on Request.