A101
Applications |
- Telecommunications
- Wireless
- Antenna
Features |
- FME connectors are used for mobile antenna applications and can be adapted for either UHF, Mini-UHF, TNC, BNC and N connector interfaces using BSA adapters.
Special Notice |
• The specification is listed below for information. All dimensions are fully complied with Military requirements.
S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt
Spray test at the moment.
• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,
QA and QC to see what equipment we have.
• Any questions, please feel free to contact our QA department.
Electrical |
Impedance |
50Ω |
Frequency Range |
0 to 2 GHz |
VSWR |
1.3: 1 Max |
Mechanical |
Mating |
M8 x 0.75 Threaded Coupling |
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
Recommended Mating Torque |
0.6 lbs ~ 2.5 lbs |
Coupling Nut Retention Force |
≥101.2 lbs |
Cable Retention Force |
≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59) |
Material |
Parts Name |
Material |
Plating |
Body |
Brass |
Nickel |
Inner Contact |
Male: Brass |
Gold or Nickel |
Insulator |
PTFE or Delrin |
None |
Gasket |
Silicone Rubber or Rubber |
None |
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.