TNC
About TNC Series
TNC connector is a threaded version of the BNC connector. The connector are miniature, weatherproof units which have constant 50 ohm impedance and It has better performance than the BNC connector at microwave frequencies, operate in the 0-11 GHz frequency range. These features make TNC connectors an ideal choice for use in cellular mobile communications, and test and instrument equipment. TNC connectors are also widely used in airframe, aerospace and radar applications where extreme vibration is a factor.
Applications
- Cellular Mobile Phones
- Test and Measurement
- Instrumentation
- Aircraft and Missile
- Radar
- Computer Networks/LANs
- Base Stations
- Microwave Components (Filters, Diplexors)
Electrical
Impedance：50Ω
Voltage Rating：≧500 V rms.(depending on cable)
Insulator Resistance：≧5 GΩ
Dielectric Withstanding Voltage： ≧1500 V rms
Contact Resistance：Center Contact ≦1.5 mΩ、Outer Contact ≦0.4 mΩ
Features
- Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
- Accommodates a wide range of popular coaxial cables.
- Screw-on coupling mating.
- Available in crimp terminations to provide for low cost installation.
- Interface according to IEC 169-17, MIL-STD-348B
Mechanical
Mating： 7/16-28 UNEF Screw-on Coupling
Force to Engage and Disengage：
Torque: ≦2 in. lbs.
Coupling Proof Torque： ≦15 in. lbs.
Coupling Mechanism Retention Rorce：≧100 lbs.
Environmental
Temperature Range： -65°C to 165°C
Corrosion (Salt Spray)： MIL-STD-202, Method 101, Cond. C
Shock： MIL-STD-202, Method 213, Cond. I
Vibration： MIL-STD-202, Method 204, Cond. B
Thermal Shock： MIL-STD-202, Method 107, Cond. B
Except Test High Temperature Shall Be +85°C.
