HB230
Applications |
• Serial digital interface (SDI)
• High definition television (HDTV)
• 3G-SDI (Per SMPTE 424M)
• NTSC & PAL video system
Features |
• Interface compatible to IEC 60169-8, CECC 22 120, MIL-PRF-39012 BNC
• Quality tested according to US MIL-STD-202
• Frequency range optimum up to 12GHz
Special Notice |
• Any questions, please feel free to contact our QA department.
Electrical |
Impedance |
75Ω |
Frequency Range |
0 to 12GHz |
VSWR |
≤1.2 (0 ~ 6GHz) |
RF Leakage |
≥55 dB |
Dielectric Withstanding Voltage |
1500 V rms |
Voltage Rating |
≥500 V rms (depending on cable) |
Inner Contact Resistance |
≤1.5 mΩ |
Outer Contact Resistance |
≤1 mΩ |
Insulation Resistance |
≥5 GΩ |
(Remark)
The above electrical specification is tested by simulation software and it’s for the connector only. It could be affected by those which can’t work properly at higher frequency, such as cable, adapter, VNA, etc.
Mechanical |
Mating |
Bayonet Coupling |
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
Recommended Mating Torque |
0.6 lbs ~ 2.5 lbs |
Coupling Nut Retention Force |
≥101.2 lbs |
Cable Retention Force |
≥ 12.1 lbs (for RG316) |
Environmental |
Temperature Range |
-65° C to 165° C |
Corrosion (Salt Spray) |
MIL-STD-202, Method 101, Cond. B |
Vibration |
MIL-STD-202, Method 204, Cond. B |
Thermal Shock |
MIL-STD-202, Method 107, Cond. B |
Mechanical Shock |
MIL-STD-202, Method 213, Cond. G |
Material |
Parts Name |
Material |
Plating |
Body |
Brass |
Nickel or Gold |
Inner Contact |
Male: Brass |
Nickel or Gold |
Insulator |
PTFE |
None |
Gasket |
Silicone Rubber, Rubber |
None |
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.