RS151
Applications |
• Spread Spectrum Wireless Devices
Features |
• These connectors may also be used in applications where keying is a necessity. The RP SMAs meet the same high quality requirements as S-Conn’s standard SMAs. They provideexcellent performance DC 18GHz for RP-SMAs.
Special Notice |
• Any questions, please feel free to contact our QA department.
Electrical |
Impedance |
50Ω |
Frequency Range |
0 to 18 GHz |
VSWR |
≤1.2 + .03f (GHz) |
RF Leakage |
≥60 dB |
Dielectric Withstanding Voltage |
1000 V rms |
Voltage Rating |
≥500 V rms (depending on cable) |
Inner Contact Resistance |
≤3 mΩ |
Outer Contact Resistance |
≤2.5 mΩ |
Insulation Resistance |
≥5 GΩ |
Mechanical |
Mating |
1/4-36 UNS Screw-on Coupling |
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
Recommended Mating Torque |
7.1 lbs ~ 9.7 lbs |
Coupling Nut Retention Force |
≥60.7 lbs |
Cable Retention Force |
≥ 7.3 lbs (for RG178) |
Environmental |
Temperature Range |
-65° C to 165° C |
Corrosion (Salt Spray) |
MIL-STD-202, Method 101, Cond. B |
Vibration |
MIL-STD-202, Method 204, Cond. D |
Thermal Shock |
MIL-STD-202, Method 107, Cond. B |
Mechanical Shock |
MIL-STD-202, Method 213, Cond. I |
Material |
Parts Name |
Material |
Plating |
Body |
Stainless steel |
Passivated or Gold |
Inner Contact |
Male: Brass |
Gold |
Insulator |
PTFE |
None |
Gasket |
Silicone Rubber |
None |
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.