T103

TNC R/A Plug, Crimp Type
Cable: RG6/U, RG58/U, RG59/U and more….

Applications

Features

Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
Accommodates a wide range of popular coaxial cables.
Screw-on coupling mating.
Available in crimp terminations to provide for low cost installation.
Interface according to IEC 169-17, MIL-STD-348B

Special Notice

• The specification is listed below for information. All dimensions are fully complied with Military requirements.

S-Conn provides commercial grade connectors, and environmental requirements we can test in-house is Salt

Spray test at the moment.

• For electrical and mechanical test, we can cover most of it in-house. Please refer to our Profile, Product Range,

QA and QC to see what equipment we have.

• Any questions, please feel free to contact our QA department.

Electrical

Impedance	50Ω / 75Ω
Frequency Range	0 to 11 GHz / 0 to 1 GHz
VSWR	≤1.3 (staraight connector) ≤ 1.35 (right angle connector)
RF Leakage	≥60 dB
Dielectric Withstanding Voltage	1500 V rms
Voltage Rating	≥500 V rms (depending on cable)
Inner Contact Resistance	≤1.5 mΩ
Outer Contact Resistance	≤1 mΩ
Insulation Resistance	≥5 GΩ

Mechanical

Mating	7 / 16-28UNEF Screw-on Coupling
Connector Durability	≥500 Cycles (for beryllium copper female contact only)
Recommended Mating Torque	4.1 lbs ~ 6.1 lbs
Coupling Nut Retention Force	≥101.2 lbs
Cable Retention Force	≥ 12.1 lbs (for RG316) ≥ 28.7 lbs (for RG58) ≥ 38.3 lbs (for RG59)

Environmental

Material

Parts Name	Material	Plating
Body	Brass	Nickel or Gold
Inner Contact	Male: Brass Female:Brass,Phosphor Bronze or Beryllium Copper	Nickel or Gold
Insulator	PTFE or Delrin	None
Gasket	Silicone Rubber, Rubber	None
Crimp Ferrule	Annealed Copper	Same as Body

Note: Other Material/Finish is Available on Request.