T108
Applications |
- Cellular Mobile Phones
- Test and Measurement
- Instrumentation
- Aircraft and Missile
- Radar
- Computer Networks/LANs
- Base Stations
- Microwave Components (Filters, Diplexors)
Features |
- Connectors are suitable for use in applications where safety can’t be compromised such as test and measurement, and medical equipment.
- Accommodates a wide range of popular coaxial cables.
- Screw-on coupling mating.
- Available in crimp terminations to provide for low cost installation.
- Interface according to IEC 169-17, MIL-STD-348B
Special Notice |
• Any questions, please feel free to contact our QA department.
Electrical |
Impedance |
50Ω / 75Ω |
Frequency Range |
0 to 11 GHz / 0 to 1 GHz |
VSWR |
≤1.3 (staraight connector) |
RF Leakage |
≥60 dB |
Dielectric Withstanding Voltage |
1500 V rms |
Voltage Rating |
≥500 V rms (depending on cable) |
Inner Contact Resistance |
≤1.5 mΩ |
Outer Contact Resistance |
≤1 mΩ |
Insulation Resistance |
≥5 GΩ |
Mechanical |
Mating |
7 / 16-28UNEF Screw-on Coupling |
Connector Durability |
≥500 Cycles (for beryllium copper female contact only) |
Recommended Mating Torque |
4.1 lbs ~ 6.1 lbs |
Coupling Nut Retention Force |
≥101.2 lbs |
Cable Retention Force |
≥ 12.1 lbs (for RG316) |
Environmental |
Temperature Range |
-65° C to 165° C |
Corrosion (Salt Spray) |
MIL-STD-202, Method 101, Cond. B |
Vibration |
MIL-STD-202, Method 204, Cond. B |
Thermal Shock |
MIL-STD-202, Method 107, Cond. B |
Mechanical Shock |
MIL-STD-202, Method 213, Cond. G |
Material |
Parts Name |
Material |
Plating |
Body |
Brass |
Nickel or Gold |
Inner Contact |
Male: Brass |
Nickel or Gold |
Insulator |
PTFE or Delrin |
None |
Gasket |
Silicone Rubber, Rubber |
None |
Crimp Ferrule |
Annealed Copper |
Same as Body |
Note: Other Material/Finish is Available on Request.